-20%
dummy plug VDI50 - Plastic
Dummy plug VDI50 - plastic
in plastic per DIN 69880 - Z2 - 50, with O-ring
Product number:
14730
-20%
Millinghead radial / VDI50 / ESX-40
Milling head radial / VDI50 / ESX-40 / TOE
angular type, VDI 50 ESX-40
transfer ratio: i = 1:1
Product number:
10959
-20%
Millinghead straight / VDI50 / ESX-40
Milling head straight / VDI50-TOEM / ESX-40
In straight version (NOT angular). To be used on axial turret...
(read more)
Product number:
10958
-20%
Tool holder VDI50 Form B1
Tool holder VDI50 ISO 10889-3-B1-50x32x55 formerly DIN 69880, Form B1
Product number:
11004
-20%
Millinghead straight / VDI50 CTS
Milling head straight / VDI50-TOEM / ESX-40
NOT angular. To be used on axial turrets for face-side millin...
(read more)
Product number:
108324
-20%
Tool holder VDI50 Form B3
Tool holder VDI50 ISO 10889-3-B3-50x32x55 , formerly DIN 69880, Form B3
Product number:
11005
-35%
Millinghead straight / VDI50 / ESX-25
Milling head straight / VDI50-TOEM / ESX-25
In straight version (NOT angular). To be used on axial turret...
(read more)
Product number:
110821
-20%
Tool holder VDI50 Form C3
Tool holder VDI50, ISO 10889-4-C3-50x32, formerly DIN 69880, Form C3
Product number:
109300
-20%
Millinghead straight / VDI50 Combi D27
Milling head straight / VDI50-TOEM / combi arbour
NOT angular. To be used on axial turret for face-side m...
(read more)
Product number:
108325
-20%
Tool holder VDI50 Form C4
Tool holder VDI50, ISO 10889-4-C4-50x32, formerly DIN 69880, Form C4
Product number:
109301
-20%
Tool holder VDI50 Form E2 D=16mm
Tool holder VDI50, ISO 10889-3-E2-50x16, formerly DIN 69880, Form E2 D=16mm
Product number:
11006
-20%
Tool holder VDI50 Form E2 D=20mm
Tool holder VDI50, ISO 10889-3-E2-50x20, formerly DIN 69880, Form E2 D=20mm
Product number:
11007
-20%
Tool holder VDI50 Form E2 D=32mm
Tool holder VDI50, ISO 10889-3-E2-50x32, formerly DIN 69880,Form E2 D=32mm
Product number:
11008
-20%
Tool holder VDI50 Form E2 D=40mm
Tool holder VDI50, ISO 10889-3-E2-50x40, formerly DIN 69880,Form E2 D=40mm
Product number:
11009
-20%
Tool holder VDI50 MK2
Tool holder VDI50, ISO 10889-7-F50-MK 2, formerly DIN 69880, for MK2 tools
Product number:
100375
-10%
Bloc-type toolholder TC800 D=50mm
Block-type tool holder with D50 mm to be screwed rigidly on the outside flat faces of axial turret-disk V...
(read more)
Product number:
113288
-10%
Bloc-type toolholder TC800 VDI50
Bloc-type tool holder TC800 VDI50 to be screwed rigidly on the outside flat faces of axial turret-disc
VD...
(read more)
Product number:
113289
-10%
Reduction sleeve D50/25 for Block-tool
Reduction sleeve D50/25 for Block-tool to clamp tools of D=25mm in the block-type holder D=50
Product number:
113292
-10%
Reduction sleeve D50/32 for Block-tool
Reduction sleeve D50/32 for Block-tool to clamp tools of D=32mm in the block-type holder D=50
Product number:
113291
-10%
Reduction sleeve D50/40 for Block-tool
Reduction sleeve D50/40 for Block-tool, to clamp tools of D=40 mm in the block-type holder D=50
Product number:
113290
-10%
Setup holder VDI50
Set-up holder VDI50 to realign the turret or turret disk after shifting (may happen after collision with ...
(read more)
Product number:
31471
-10%
Calibration toot VDI50 toolsetter
Calibration holder VDI 50, for calibration of measurement probe
Product number:
31504